1. Do you need to capture any of the following satellites? The most of the following satellites uses Ku band linear signal(Z10L or Z20L) and requires a minimum of 33 inches (75 cm) dish. 91.0°W Galaxy 11 60322 121.0°W EchoStar 9/Intelsat Americas 13 60324 93.0°W Intelsat Americas 6 60325 123.0°W Galaxy 10R 60318 95.0°W Galaxy 3C 60321 127.0°W Galaxy 13/Horizons 1 60320 97.0°W Intelsat Americas 5 60325 129.0°W Intelsat Americas 7 60222 99.0°W Galaxy 4R 60320 If you need to capture one of the above satellites, you will need to use T90 with Z10L or Z20L LNBFs. 2. If your target satellites are only the following; 82.0°W Nimiq 2 60321 110.0°W DirecTV 5 60217 91.0°W Nimiq 1 60324 EchoStar 6 60324 101.0°W DirecTV 1R/4S/8 60325 EchoStar 8 60322 119.0°W EchoStar 7 60323 DirecTV 7S 60302 You will be OK with T55 with M10R or M20R. These satellites can be also captured for a better and stable signal with T90 with M10R or M20R. For DirecTV 5, you will must use C10R. 3. If you have two or more receivers, you will need to buy a package with dual output LNBFs. With dual output LNBFs, you will be able to hook up to two or more receivers using various switches. 4. For T90 buyer, if you have a commercial address or willing to pick up at shipper's station near your location, order T90 under "T90 Package to Commercial Address or pickup" to save shipping cost. To find shipper's station near your location: a. Go to www.baxglobal.com and at the office directory area, b. Enter your zip code and retrieve station address and phone number.
